FMB001 Advanced Plug and Track real-time tracking terminal

  • FMB001 Advanced Plug and Track real-time tracking terminal
  • FMB001 Advanced Plug and Track real-time tracking terminal
  • FMB001 Advanced Plug and Track real-time tracking terminal
  • FMB001 Advanced Plug and Track real-time tracking terminal
  • FMB001 Advanced Plug and Track real-time tracking terminal
  • FMB001 Advanced Plug and Track real-time tracking terminal
0 1 2 3 4 5 0 1

Již není v prodeji

Najít podobné zboží

FMB001 Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth connectivity

OBDII data reading
FMB001 connects directly to car OBDII connector and is able to read up to 32 vehicle onboard parameters.

Bluetooth
Integrated Bluetooth enables wireless headset and various other Bluetooth sensors connectivity.
Make phone calls to Your employee via Bluetooth headset. No unauthorized calls anymore! Be sure that your employee is always safe and uses hands free headset instead of phone!

Read records and configure your tracker wirelessly via Bluetooth
No inconvenient configuration via SMS or searching for tracker in hard to reach places to connect USB cable.
Single push and your device is connected to configurator via Bluetooth.

Micro SD card
Don’t lose any records with micro SD card up to 32 GB!
FMB001 will store all data in micro SD card when driving in areas where GSM is not available.

Advanced antitheft system
Prevent your vehicle from theft with advanced antitheft functionality. Combine Auto Geofencing with new Towing detection functionality.

Smart Crash detection
Ensure safety of Your employee with smart Crash detection. Get alarm message immediately after accident, save workers life!

Detailní aktuální informace (popis, vlastnosti, technické detaily, soubory ke stažení, videa a novinky) najdete na stránkách výrobce:
http://www.teltonika.lt/product/fmb001/













TECHNOLOGY
GNSS i
GPRS i
SMS i
Bluetooth i

HARDWARE
1x Micro-SIM card i
K-Line (OBD II) i
Internal GSM antenna i
Internal GNSS antenna i
OBD II connector i
OBD II Data i
DIN – digital input – 1 i
Accelerometer i
Battery – 170mAh Li-ion 3,7V i
IP41 i
1MB memory i
Micro SD i
10 - 16V i
USB 2.0 Interface i

FIRMWARE
NITZ time synch. i
Configuration over Bluetooth i
Ignition detection i
Geo-fence i
Sleep/Deep sleep i
Overspeeding detection i
FOTA i
GPRS commands i
Eco driving i
Green driving i
Jamming detection i
NTP time synch. i
SMS event i
Idling detection i
Crash detection i
Odometer i
Trip detection i
Towing detection i
Integrated scenarios i
Remote configuration over SMS i
Offline tracking i
Auto Geofencing i
Voice call i


GSM:
Quad-band 900/1800 MHz; 850/1900 MHz
GPRS class 12 (up to 240 kbps)
SMS (text/data)
Micro-SIM format

Bluetooth:
Bluetooth specification V3.0
Bluetooth transceiver fully compliant with Bluetooth specification V3.0 for external peripherals:
Voice calls over Bluetooth
Configuration via Bluetooth
Bluetooth sensors

GPS/GLONASS:
Tracking: 33/ 99 acquisition channels
-165 dBM sensitivity
Hot start <1s
Warm Start < 25s
Cold start < 35s
NMEA-183 protocol
GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS
Accuracy < 3m

Interface:
1 Digital Input Reserved for Ignition Status Monitoring (depends on vehicle type)
Accelerometer
Power supply (+10…+16) V DC
Integrated back-up battery
Internal High Gain GSM antenna
Internal High Gain GNSS antenna
Dimensions: L(50,7mm)xW(49,6mm)xH(25mm)
2 Status LEDs
Configuration and firmware upload (FOTA and via cable)